SELECTING THE CORRECT SIZE
Scopecoat® protective covers fit a variety of optics. When choosing the right size Scopecoat, measure the overall length of your scope in inches and the objective lens in millimeters.
Scopecoat stretches to custom fit to your optic while providing maximum protection. Our standard Scopecoat cylindrical covers can stretch approximately 1 to 1 .5 inches beyond the stated size. For example, a 10 .5” cover may stretch from 11 .5 inches to almost 12 inches. With this in mind, select the right size for either a relaxed or snug fit.
To determine what size Scopecoat® you will need for cylindrical type scopes, follow the steps below.
MEASURING YOUR OPTIC
Optic sizes are listed by overall length and objective sizes. The length is measured in inches and the objective is measured in millimeters (mm).
Measure the overall length of the scope, including the size of the sunshade, if applicable.
Measure the objective lens in millimeters. The objective end of the scope is the end that you see out of, or the end furthest from your eye.
Measure the turrets, (These are the adjustment knobs in the center of the scope, i .e .: Windage, Elevation, and, or, Parallax knobs). We consider turrets that are .75 inches or more to be “Tall Turrets,” for those models we suggest the XP-6TM Flak Jacket to maximize coverage.
Standard Scopecoat™ protective covers are designed to fit scopes with standard height turrets.
XP-6TM Flak Jacket Scopecoat™ protective covers are designed to fit scopes with tall or tactical turrets.
Scopecoat™ is available in 2 thicknesses: Standard Scopecoat™ in 3mm, and our XP-6TM Flak Jacket in 6mm thicknesses.
MEASURING YOUR BINOCULARS
Type: Determine if your Binoculars are Porro Prism or Roof Prism design.
Length: Measure the distance from the ocular (eyepiece) to the objective.
Width: Measure the distance across the closed hand-band (where you hold the binoculars).
MEASURING YOUR BARREL BOOT™
Measure the length and diameter of the barrel to determine the right cover for your barrel. Standard sizes are listed in the fit chart on page 21. For questions or more details go to Scopecoat.com, or send us an email at info@scopecoat .com.Type your paragraph here.
HOW TO MEASURE YOUR OPTIC
Type your paragraph here.
We Live to Protect!
SENTRY Products Group, LLC 2697 INTERNATIONAL PKWY #3-140 • VIRGINIA BEACH, VA 23452 • 877.726.7328 • FAX: 757.689.6066 •info@sentryLTP.com
© 2016 Sentry Products Group, LLC All Rights Reserved U.S. Patent #5661920 • U.S. Patent #5850706 • All Manufacturers Products are Copyrighted & Trademarked
SentryLTP.COM • 877.726.7328